Cables de interfaz

Cable - RS232: DB9 Female Connector, 7ft. (2.1m) Straight, TxD on 2 Requires 12V Power Supply

NP: CBA-R07-S07PAR

Cantidad Disponible: 79

Cable - RS232: DB9 Female Connector, 9ft. (2.8m) Coiled, TxD on 2, 12V Requires 12V Power Supply, Low Temp -30°C

NP: CBA-RF1-C09PAR

Cantidad Disponible: 18

Micro USB Active-Sync Cable. Allows for Active-Sync Connectivity Between the Mobile Computer Single or Two Slot Cradle and a Host Device. Also Used to Connect the MS4717 Fixed Mount Imager to a USB Host for Communication

NP: 25-124330-01R

Cantidad Disponible: 11

Cable - Shielded USB: Series A Connector, 7ft. (2.1m), Straight, Supports 12V Power Supply

NP: CBA-U42-S07PAR

Cantidad Disponible: 33

ZEBRA - SNAP-ON USB COMMUNICATION/CHARGING CABLE CUP. REQUIRES POWER SUPPLY (PWR-BGA12V50W0WW), DC LINE CORD (CBL-DC-388A1-01), AND COUNTRY SPECIFIC LINE CORD.

NP: CBL-RFD49-USB1-01

TC7X Snap-on Dex Cable. Attaches to the rear accessory port on the TC7X. Does not provide device charging and can't be used at the same time as other Snap-on accessories.

NP: CBL-TC7X-DEX1-01

USB Cable (Type A to Type C),ZR138 (CN) (Qty 5)

NP: CBL-MPV-USB1-05

MC55/MC65/MC67 DEX Cable. Enables the transmission of data between the MC55/MC65 and the customers inventory system at the time of delivery.

NP: 25-127558-02R

CABLE, ASSEMBLY, MM,CABLE, DB15M TO DB9M

NP: 25-159547-01

HS2100 cable to connect directly to WT6000 ONLY

NP: CBL-HS2100-12S1-02

DEX Cable for Cable Adapter Module ADP9000-100R must be ordered separately

NP: 25-62167-02R

MC18 USB Client Communication Cable for Cradle to the host system

NP: CBL-MC18-USB1-01

PSS Cradle Interconnection Cable 60 Inch (1.5M). Connects Cradles to each other to run off one power supply PWR-BGA12V108W0WW at a maximum of 12 terminals.

NP: 25-66430-01R

Freezer pouch to use when using an extended battery with the WT4090 wearable terminal. Can be hip- or wrist-mounted wrist mounting requires straps, sold separately.

NP: SG-WT4026000-20R

WT6000 Vibrating Cable. Connects Directly To The Wearable Terminal And Provides Additional Haptic Feedback To The User.

NP: CBL-NGWT-HDVBAP-01

PSS Cradle Interconnection Cable 12.6 Inch (32cm). Connects Cradles to each other to run off one power supply PWR-BGA12V108W0WW at a maximum of 12 terminals.

NP: 25-66431-01R

USB Cable Assembly: 9-Pin Female Straight Scanner Connector, 6ft. Straight Cable, to be used with General Purpose Fixed Mount Scanners

NP: CBL-58926-04

RCH50/RCH51 training cable - Y Cable to connect two RCH50/RCH51 headsets to one mobile computer

NP: 25-129938-02R

MC55/65/67: USB Charge and Communication Cable from the Terminal to Host system. Charging requires Power Supply PWR-BUA5V16W0WW, DC cable CBL-DC-383A1-01, and country specific two wire ungrounded AC power line cord

NP: 25-108022-04R

TC8X USB/Charging Cable. Provides communication via USB and will charge a TC8000 Device. Requires Power Supply PWR-BUA5V16W0WW, DC Cable CBL-DC-383A1-01 and Country specific 2-Wire un-grounded AC Line Cord.

NP: CBL-TC8X-USBCHG-01

WT6000 USB/Charging Cable. Allows To Communicate Via USB and Charge the Wearable Terminal. Requires Power Supply PWR-BUA5V16W0WW, DC Cable CBL-DC-383A1-01 and Country Specific 2-ire Ungrounded AC Line Cord

NP: CBL-NGWT-USBCHG-01

HS2100 cable to connect directly to TC7X and TC8000

NP: CBL-HS2100-3MS1-01

USB Cable (Type A to Type C),ZR138 (CN)

NP: CBL-MPV-USB1-01

Kit, USB Type A to Type C Cable

NP: CBL-MPM-USB1-01

Cantidad Disponible: 30

USB-C cable with 90 degree bend in USB-C adapter

NP: CBL-TC2Y-USBC90A-01

Cantidad Disponible: 8

MC30/MC31/MC32 USB Client Communication and Charging Cable. Must order Power Supply PWR-BUA5V16W0WW, DC Line Cord CBL-DC-383A1-01 and 2-wire ungrounded AC Line Cord separately.

NP: 25-67868-03R

ASSY,CABLE, USB 2.0, A TO MINI B,iMZ/QLn/RW/ZQ6

NP: AT17010-1

Cantidad Disponible: 180

Multi-Plane Scanner Standard USB Cable, 16.4ft. (5m), Type A Connector

NP: CBA-U51-S16ZAR

Cantidad Disponible: 4

MC93 USB AND CHARGE CABLE, PROVIDES FAST-CHARGE WHEN A MC93+ BATTERY AND A WALL ADAPTER IS USED, IT ALSO ALLOWS USB COMMUNICATION TO THE DEVICE WHEN CONNECTED TO A PC. REQUIRES: CBL-TC2X-USBC-01 and WALL ADAPTER PWR-WUA5V12W0US

NP: CBL-MC93-USBCHG-01

Cantidad Disponible: 58

HS3100 Charging and Communication cable, USB Type-A

NP: CBL-HS3100-CUC1-01

Snap-on USB Communication/Charging Cable. Includes insert/shim that requires removal when using a TC5X unit with the Rugged Boot/Exoskeleton attached. Requires USB Power Supply PWR-WUA5V12W0xx (xx denotes country specific plug)

NP: CBL-TC51-USB1-01

Cantidad Disponible: 220

Snap-On USB Communication/Charge Cable. Attaches to the rear accessory port on the TC7X. For charging, PWR-BUA5V16W0WW, DC Cable CBL-DC-383A1-01 and Country specific AC Line Cord sold separately

NP: CBL-TC7X-USB1-01

Cantidad Disponible: 17

Cable - RS232: DB9 Female Connector, 15ft. (4.6m) Straight, TxD on 2 Requires 12V Power Supply

NP: CBA-R21-S15PAR

MC33 USB AND CHARGE CABLE, PROVIDES FAST-CHARGE WHEN A MC33+ BATTERY AND A WALL ADAPTER IS USED, IT ALSO ALLOWS USB COMMUNICATION TO THE DEVICE WHEN CONNECTED TO A PC. REQUIRES: WALL ADAPTER PWR-WUA5V12W0US

NP: CBL-MC33-USBCHG-01

18 CM USB TYPE A CABLE FOR WAREHOUSE KEYBOARD

NP: A9183902

3.5mm keyed/collared female to 3.5mm male Headset Adapter Cable (3.5mm jack). Required for use with headsets that use a locking keyed connector on the headset jack (i.e. HDST-35MM-PTVP-01). Includes Retention/Anti-Rotation Lock (ADP-LOCK-3.5HT1-01)

NP: CBL-TC51-HDST35-01