Cables de interfaz

Cable - RS232: DB9 Female Connector, 7ft. (2.1m) Straight, TxD on 2 Requires 12V Power Supply

NP: CBA-R07-S07PAR

Cantidad Disponible: 79

Cable - RS232: DB9 Female Connector, 9ft. (2.8m) Coiled, TxD on 2, 12V Requires 12V Power Supply, Low Temp -30°C

NP: CBA-RF1-C09PAR

Cantidad Disponible: 18

USB C TO USB A COMMUNICATIONS AND CHARGING CABLE, 1M LONG, CAN BE USED WITIH VEHICLE CRADLE # CRD-TC56-CVCD2-02.

NP: CBL-TC5X-USBC2A-01

Cantidad Disponible: 1697

Cable - Shielded USB: Series A Connector, 7ft. (2.1m), Straight

NP: CBA-U21-S07ZBR

Cantidad Disponible: 12

Micro USB Active-Sync Cable. Allows for Active-Sync Connectivity Between the Mobile Computer Single or Two Slot Cradle and a Host Device. Also Used to Connect the MS4717 Fixed Mount Imager to a USB Host for Communication

NP: 25-124330-01R

Cantidad Disponible: 11

Cable - Shielded USB: Series A Connector, 7ft. (2.1m), Straight, Supports 12V Power Supply

NP: CBA-U42-S07PAR

Cantidad Disponible: 33

Cable - Shielded USB: Series A, 9ft. (2.8m), Coiled, BC1.2 (High Current), -30°C

NP: CBA-UF6-C12ZAR

Cable - Shielded USB: Series A Connector, 15ft. (4.6m), Straight, BC 1.2

NP: CBA-U47-S15ZAR

Cantidad Disponible: 7

Cable - Shielded USB: Series A Connector, 7ft. (2.1m), Straight, BC 1.2

NP: CBA-U46-S07ZAR

Cantidad Disponible: 35

Cable - RS232: DB9 Female Connector, 9ft. (2.8m) Coiled, Power Pin 9

NP: CBA-R71-C09ZAR

ZEBRA - SNAP-ON USB COMMUNICATION/CHARGING CABLE CUP. REQUIRES POWER SUPPLY (PWR-BGA12V50W0WW), DC LINE CORD (CBL-DC-388A1-01), AND COUNTRY SPECIFIC LINE CORD.

NP: CBL-RFD49-USB1-01

TC7X Snap-on Dex Cable. Attaches to the rear accessory port on the TC7X. Does not provide device charging and can't be used at the same time as other Snap-on accessories.

NP: CBL-TC7X-DEX1-01

USB Cable (Type A to Type C),ZR138 (CN) (Qty 5)

NP: CBL-MPV-USB1-05

DEX cables w/ floating Jack Screws

NP: 25-62167-03R

PS20 USB Communication/Programmer cable

NP: CBL-PS20-USBCHG-01

MC55/MC65/MC67 DEX Cable. Enables the transmission of data between the MC55/MC65 and the customers inventory system at the time of delivery.

NP: 25-127558-02R

Speaker cable adapter, for HSN4040A, VC70. Required to connect the HSN4040A external speaker.

NP: 25-159552-01

CABLE, ASSEMBLY, MM,CABLE, DB15M TO DB9M

NP: 25-159547-01

HS2100 cable to connect directly to WT6000 ONLY

NP: CBL-HS2100-12S1-02

DEX Cable for Cable Adapter Module ADP9000-100R must be ordered separately

NP: 25-62167-02R

MC18 USB Client Communication Cable for Cradle to the host system

NP: CBL-MC18-USB1-01

Zebra Printer cable. Need to order the ADP9000 to connect printer cable

NP: 25-62170-02R

Mains AC Cord, NA, 6ft

NP: CS-CAB-NA-MLEAD

PSS Cradle Interconnection Cable 60 Inch (1.5M). Connects Cradles to each other to run off one power supply PWR-BGA12V108W0WW at a maximum of 12 terminals.

NP: 25-66430-01R

Freezer pouch to use when using an extended battery with the WT4090 wearable terminal. Can be hip- or wrist-mounted wrist mounting requires straps, sold separately.

NP: SG-WT4026000-20R

WT6000 HEADSET ADAPTER CABLE (LONG VERSION). SUPPORTS HEADSETS WITH QUICK-DISCONNECT CONNECTOR. RECOMMENDED FOR VOICE DIRECTED PICKING (VDP) APPLICATIONS WHILE THE WEARABLE TERMINAL IS WORN ON THE HIP.

NP: CBL-NGWT-AUQDLG-02

WT6000 Vibrating Cable. Connects Directly To The Wearable Terminal And Provides Additional Haptic Feedback To The User.

NP: CBL-NGWT-HDVBAP-01

PSS Cradle Interconnection Cable 12.6 Inch (32cm). Connects Cradles to each other to run off one power supply PWR-BGA12V108W0WW at a maximum of 12 terminals.

NP: 25-66431-01R

USB Cable Assembly: 9-Pin Female Straight Scanner Connector, 6ft. Straight Cable, to be used with General Purpose Fixed Mount Scanners

NP: CBL-58926-04

RCH50/RCH51 training cable - Y Cable to connect two RCH50/RCH51 headsets to one mobile computer

NP: 25-129938-02R

Screen blanking cable DB9 to open wires

NP: CA1300

Cable - RS232: DB9 Female Connector, 20ft. (6.0m) Coiled, TxD on 2, with TTL Current Limit Protection

NP: CBA-R06-C20PBR

WT4X Headset Adapter Cable Short Version 4 inch. Requires HS2100 Quick Disconnect Cable, CBL-HS2100-QDC1-01, to attach to a HS2100

NP: 25-129940-03R

MC55/65/67: USB Charge and Communication Cable from the Terminal to Host system. Charging requires Power Supply PWR-BUA5V16W0WW, DC cable CBL-DC-383A1-01, and country specific two wire ungrounded AC power line cord

NP: 25-108022-04R

TC8X USB/Charging Cable. Provides communication via USB and will charge a TC8000 Device. Requires Power Supply PWR-BUA5V16W0WW, DC Cable CBL-DC-383A1-01 and Country specific 2-Wire un-grounded AC Line Cord.

NP: CBL-TC8X-USBCHG-01

Kit Serial Interface Cable, 6FT (DB-9 to DB-9) Null Modem

NP: G105950-054

Cable - RS232: DB9 Female Connector, 9ft. (2.8m) Coiled, Power Pin 9, TxD on 2, True Converter, -30°C

NP: CBA-RF3-C09ZAR

WT6000 USB/Charging Cable. Allows To Communicate Via USB and Charge the Wearable Terminal. Requires Power Supply PWR-BUA5V16W0WW, DC Cable CBL-DC-383A1-01 and Country Specific 2-ire Ungrounded AC Line Cord

NP: CBL-NGWT-USBCHG-01