Cables de interfaz

CBL-TC5X-USBC2A-01 - ZEBRA - Cable USB USB-A to USB-C communications and charging cable. The cable has a length of approximately 1 meter or 3.25 feet. Attaches to USB-C port on bottom of device. Can be used with USB Cigarette lighter adapter (CHG-AUTO-USB1-01) for in-vehicle charging.

NP: CBL-TC5X-USBC2A-01

Cantidad Disponible: 301

CBA-R07-S07PAR - ZEBRA - Cable Serial/RS232 Cable - RS232: DB9 Female Connector, 7ft. (2.1m) Straight, TxD on 2 Requires 12V Power Supply

NP: CBA-R07-S07PAR

25-124330-01R - ZEBRA - Cable USB This is a micro-USB active-sync cable that allows for active-sync connectivity between the mobile computer in a single-slot or two-slot cradle and a host device. This cable is typically used with a single-slot USB / charging cradle and the length is approximately 48 inches.

NP: 25-124330-01R

Cantidad Disponible: 35

CBA-U42-S07PAR - ZEBRA - Cable USB Cable - Shielded USB: Series A Connector, 7ft. (2.1m), Straight, Supports 12V Power Supply

NP: CBA-U42-S07PAR

Cantidad Disponible: 10

CBA-RF1-C09PAR - ZEBRA - Cable Serial/RS232 Cable - RS232: DB9 Female Connector, 9ft. (2.8m) Coiled, TxD on 2, 12V Requires 12V Power Supply, Low Temp -30°C

NP: CBA-RF1-C09PAR

CBL-RFD49-USB1-01 - ZEBRA - Cable USB Snap-on USB Communication/Charging Cable Cup. Requires Power Supply (PWR-BGA12V50W0WW), DC Line Cord (CBL-DC-388A1-01), and Country Specific Line Cord.

NP: CBL-RFD49-USB1-01

CBL-TC7X-DEX1-01 - ZEBRA - Cable auxiliar TC7X Snap-on Dex Cable. Attaches to the rear accessory port on the TC7X. Does not provide device charging and can't be used at the same time as other Snap-on accessories.

NP: CBL-TC7X-DEX1-01

CBL-MPV-USB1-05 - ZEBRA - Cable USB para impresora USB Cable (Type A to Type C),ZR138 (CN) (Qty 5)

NP: CBL-MPV-USB1-05

25-127558-02R - ZEBRA - Cable auxiliar MC55/MC65/MC67 DEX Cable. Enables the transmission of data between the MC55/MC65 and the customers inventory system at the time of delivery.

NP: 25-127558-02R

25-159547-01 - ZEBRA - Cable auxiliar CABLE, ASSEMBLY, MM,CABLE, DB15M TO DB9M

NP: 25-159547-01

CBL-HS2100-12S1-02 - ZEBRA - Cable auxiliar HS2100 cable to connect directly to WT6000 ONLY

NP: CBL-HS2100-12S1-02

25-62167-02R - ZEBRA - Cable auxiliar DEX Cable for Cable Adapter Module ADP9000-100R must be ordered separately

NP: 25-62167-02R

CBL-MC18-USB1-01 - ZEBRA - Cable USB MC18 USB Client Communication Cable for Cradle to the host system

NP: CBL-MC18-USB1-01

25-66430-01R - ZEBRA - Cable auxiliar DC power interconnect cord is used to connect two cradles, each with one to six slots, to run off a single power supply. The cable has a length of 60 inches.

NP: 25-66430-01R

SG-WT4026000-20R - ZEBRA - Cable USB Freezer pouch to use when using an Bateria Extendida with the WT4090 wearable terminal. Can be hip- or wrist-mounted wrist mounting requires straps, sold separately.

NP: SG-WT4026000-20R

CBL-NGWT-HDVBAP-01 - ZEBRA - Cable auxiliar WT6300 Vibrating Cable. Connects Directly To The Wearable Terminal And Provides Additional Haptic Feedback To The User.

NP: CBL-NGWT-HDVBAP-01

25-66431-01R - ZEBRA - Cable auxiliar DC power interconnect cord is used to connect two cradles, each with one to six slots, to run off a single power supply. The cable has a length of 12.6 inches.

NP: 25-66431-01R

CBL-58926-04 - ZEBRA - Cable USB USB Cable Assembly: 9-Pin Female Straight Scanner Connector, 6ft. Straight Cable, to be used with General Purpose Fixed Mount Scanners

NP: CBL-58926-04

25-129938-02R - ZEBRA - Cable auxiliar RCH50/RCH51 training cable - Y Cable to connect two RCH50/RCH51 headsets to one mobile computer

NP: 25-129938-02R

25-108022-04R - ZEBRA - Cable USB MC55/65/67: USB Charge and Communication Cable from the Terminal to Host system. Charging requires Power Supply PWR-BUA5V16W0WW, DC cable CBL-DC-383A1-01, and country specific two wire ungrounded AC power line cord

NP: 25-108022-04R

CBL-TC8X-USBCHG-01 - ZEBRA - Cable USB TC8X USB/Charging Cable. Provides communication via USB and will charge a TC8000 Device. Requires Power Supply PWR-BUA5V16W0WW, DC Cable CBL-DC-383A1-01 and Country specific 2-Wire un-grounded AC Line Cord.

NP: CBL-TC8X-USBCHG-01

CBL-NGWT-USBCHG-01 - ZEBRA - Cable USB WT6300 / WT6400 USB/Charging Cable. Allows To Communicate Via USB and Charge the Wearable Terminal. Requires Power Supply PWR-BUA5V16W0WW, DC Cable CBL-DC-383A1-01 and Country Specific 2-ire Ungrounded AC Line Cord

NP: CBL-NGWT-USBCHG-01

CBL-HS2100-3MS1-01 - ZEBRA - Cable auxiliar HS2100 headset standard cable to use with TC5X, TC7X or TC8000. The length is 43 inches or 1.1 meters long. Includes one clothing clip. Requires 3.5mm keyed / collared female to 3.5mm male headset adapter cable (CBL-TC51-HDST35-01).

NP: CBL-HS2100-3MS1-01

CBL-MPV-USB1-01 - ZEBRA - Cable USB para impresora USB Cable (Type A to Type C),ZR138 (CN)

NP: CBL-MPV-USB1-01